# 1 "/u/exp/stan/nmr/lists/pp/diffus_d2o.gc" ;diffus_d2o.gc ;avance-version ;self diffusion measurement, stimulated echo (PFGSTE) ;using incremented gradient pulse duration for ;application of increasing PFGs ; ;Tanner, J. E., J. Chem. Phys. 1970, 52, 2523. ;pl1 : f1 channel - power level for pulse (default) ;p1 : f1 channel - 90 degree high power pulse ;d1 : relaxation delay; 1-5 * T1 ;pl9: presat power level during d1 and T delay (~80-90 dB) ;p16 gpz1: 3-9-19 gradient; 700u 28% ;d19: 3-9-19 delay; ~40-120us ;d8: diffusion delay; 50-150 ms ;cpdprg2 is WALTZ16, pcpd2=202u @ pl12=8.75db @750 ;gpz2: gradient power level (try 50-70? look for amp shutdown with ; longer values of d0- red light on front of gradient amp) ;in0=in15: gradient pulse length increment (try 250u~500u?) ; d15 will be decremented after each spectrum to compensate ; for the increased duration of d0, therefore if td1*in15>d15-in15 ; an error message will be generated at the start of acquisition ; (but acquisition will still commence). ; ; small delta values start at d0+250u, go up as d0+250u+in0 ; (e.g., for d0 = 62.5u, in0=62.5u to do equivalent) ;uncomment next line for setup of 1D version ;#define ONE_D ;uncomment next line for 15N decoupling during acquisition ;#define N15_DEC ;d8 is big delta delay ;"d8=80m" "d5=5.2m" "d16=300u" "d11=30m" "d12=20u" "d13=3u" "d15=d5-350u-d0" "d18=d8-d5-p1*2-d13-d12*2" "d25=p1" ;"in15=in0" # 1 "/u/exp/stan/nmr/lists/pp//Avance.incl" ;Avance.incl ; ;version 99/08/02 # 49 "/u/exp/stan/nmr/lists/pp/diffus_d2o.gc" 1 ze 2 d11 do:f2 3 d11 d11 setnmr2^0 20u pl9:f1 d1 cw:f1 20u do:f1 20u pl1:f1 20u setnmr2|0 p1:f1 ph1 3u 250u gron2 d0 100u groff d15 p1:f1 ph1 d12 pl9:f1 d18 cw:f1 d13 do:f1 d12 pl1:f1 p1:f1 ph1 3u 250u gron2 d0 100u groff d15 d12 d16 pl12:f2 # 80 "/u/exp/stan/nmr/lists/pp/diffus_d2o.gc" go=2 ph31 # 85 "/u/exp/stan/nmr/lists/pp/diffus_d2o.gc" d11 wr #0 if #0 do:f2 id0 zd 20u dd15 lo to 3 times td1 d11 setnmr2^0 exit ph1=0 2 1 3 ph2=1 1 2 2 ph4=0 0 1 1 ph5=2 2 3 3 ph31=0 2 1 3